DDB2=0, Type1=00, OSE1=0, Type3=00, DDB3=0, RO3=0, OSE2=0, Type0=00, RO0=0, OSE3=0, DDB0=0, RO2=0, OSE0=0, DDB1=0, Type2=00, RO1=0
iEvent Control Register: Low
| Type0 | Output Channel Type 0 0 (00): The channel is disabled. 1 (01): The channel is defined as a DMA request output. 2 (10): The channel is defined as a hardware trigger output. 3 (11): The channel is defined as an interrupt request output. |
| OSE0 | One-Shot Enable 0 0 (0): The channel event output is enabled to occur multiple times. 1 (1): The channel event output is enabled to occur one time. |
| DDB0 | Disable Done Broadcast 0 0 (0): The event done indicators are broadcast to the appropriate selected event inputs. 1 (1): The event done indicators are not broadcast to the appropriate selected event inputs. |
| RESERVED | no description available |
| RO0 | Read-Only 0 0 (0): The iEvent configuration registers for this channel can be read and written. 1 (1): The iEvent configuration registers for this channel can only be read. |
| Type1 | Output Channel Type 1 0 (00): The channel is disabled. 1 (01): The channel is defined as a DMA request output. 2 (10): The channel is defined as a hardware trigger output. 3 (11): The channel is defined as an interrupt request output. |
| OSE1 | One-Shot Enable 1 0 (0): The channel event output is enabled to occur multiple times. 1 (1): The channel event output is enabled to occur one time. |
| DDB1 | Disable Done Broadcast 1 0 (0): The event done indicators are broadcast to the appropriate selected event inputs. 1 (1): The event done indicators are not broadcast to the appropriate selected event inputs. |
| RESERVED | no description available |
| RO1 | Read-Only 1 0 (0): The iEvent configuration registers for this channel can be read and written. 1 (1): The iEvent configuration registers for this channel can only be read. |
| Type2 | Output Channel Type 2 0 (00): The channel is disabled. 1 (01): The channel is defined as a DMA request output. 2 (10): The channel is defined as a hardware trigger output. 3 (11): The channel is defined as an interrupt request output. |
| OSE2 | One-Shot Enable 2 0 (0): The channel event output is enabled to occur multiple times. 1 (1): The channel event output is enabled to occur one time. |
| DDB2 | Disable Done Broadcast 2 0 (0): The event done indicators are broadcast to the appropriate selected event inputs. 1 (1): The event done indicators are not broadcast to the appropriate selected event inputs. |
| RESERVED | no description available |
| RO2 | Read-Only 2 0 (0): The iEvent configuration registers for this channel can be read and written. 1 (1): The iEvent configuration registers for this channel can only be read. |
| Type3 | Output Channel Type 3 0 (00): The channel is disabled. 1 (01): The channel is defined as a DMA request output. 2 (10): The channel is defined as a hardware trigger output. 3 (11): The channel is defined as an interrupt request output. |
| OSE3 | One-Shot Enable 3 0 (0): The channel event output is enabled to occur multiple times. 1 (1): The channel event output is enabled to occur one time. |
| DDB3 | Disable Done Broadcast 3 0 (0): The event done indicators are broadcast to the appropriate selected event inputs. 1 (1): The event done indicators are not broadcast to the appropriate selected event inputs. |
| RESERVED | no description available |
| RO3 | Read-Only 3 0 (0): The iEvent configuration registers for this channel can be read and written. 1 (1): The iEvent configuration registers for this channel can only be read. |